Description

Boost Converter DC To DC แปลงไฟจาก 10-32V เป็น 12-35V (Step Up) Voltage Charger Module 150W ราคา 65 บาท

ราคา

65

บาท

ราคา

65

บาท

Boost Converter DC To DC แปลงไฟจาก 10-32V เป็น 12-35V (Step Up) Voltage Charger Module150W
*****(โปรดอ่านก่อน ก่อนใช้งานทดสอบป้อนอินพุท ที่ 12 VDC วัดเอาท์พุทจะได้ 25-30 VDC ซึ่งร้านทดสอบและปรับใว้แล้ว หากต่อกับอุปกรณ์อื่นที่ไม่ใช่ไฟDCที่แปลงจากไฟบ้าน อาจจะมีปัญหา มีปัญหาถ่ายคลิปและรูปส่ง ไฟเข้าเท่าไร ออกเท่าไร ทุกครั้งภายใน 7 วัน)*****

Disclaimer: The output power of this module is affected by many factors such as the pre-stage power supply and the post-stage load, etc.; the following data are the results measured by professional equipment, regardless of other factors. The power module is a kind of electronic component, please do not purchase it carefully without electronic expertise.
Module parameter

Module nature: non-isolated boost module

Module size: length 65MM* height 23MM* (width 56.5MM including heat sink)

Input mode: IN+ input positive level, IN- input negative
output mode: OUT+ output positive level, OUT-output negative

Wiring method: no soldering, terminal

Input voltage: 10-32V

Output voltage: (1) continuously adjustable (12-35V) our default delivery voltage 19V

(2) Fixed output (optional between 12-35V), please tell the shopkeeper when purchasing.

Output current: 6A (MAX)

Input current: 10A (MAX) (more than 10A, please strengthen the heat,)

Output power: natural cooling 100W (MAX), plus fan 150W (MAX)

Easily drive 65W 90W laptops including dual cores

Using a 12V battery with a normal 19V 3.42A laptop module temperature of about 45 degrees

Conversion efficiency: 94% (measured when inputting 16V output 19V 2.5A) (for reference only)

Operating temperature: industrial grade (-40 C to +85 C) (ambient temperature exceeds 40 degrees, please reduce power usage, or add a fan)

Full load temperature rise: 45 C

No-load current: typical 25mA

Short circuit protection: None (please install overcurrent protector at input)

Input reverse connection protection: none, input series diode

Application range

1) DIY an output adjustable car power supply, only need to connect your 12V power supply at the input, you can (14-35V) free continuous adjustment, but the output voltage can not be lower than the input voltage.

2) Universal car laptop power supply. The input is connected to your 12V power supply and the output is regulated to the voltage of your notebook to work.

3) Boost charger, you can use 12V power supply to charge batteries above 12V, such as 24V battery.

4) Power your electronic equipment. Just adjust the voltage to the voltage you need and the current does not exceed the rated current.

5) Power supply in front of the system. When you input 10-18V when you are working on a project, your system board needs about 24V power supply and its power is very high. The power of ordinary DC-DC module is too small. , then you choose our module will be your best choice, you can work without debugging directly on the machine, easy to achieve efficient high-power boost.

ราคา

65

บาท

จำหนายโดย

ช็อป99